Product added to cart
Hypervolt Home 3 Pro EV Charger, Type 2, Grey, 5m Tethered Lead
Next
Hypervolt Home 3 Pro EV Charger, Type 2, Black, 7.5m
Previous
Hypervolt Home 3 Pro EV Charger, Type 2, White, 7.5m Tethered Lead
£670.00
In stock
SKU
HVH3P-W-7.5
free shipping
Hassle Free Returns
Product Information
Model: Home 3 Pro
Connection Capacity: Single Phase, 7.4kW AC
Charging Connector: Tethered, IEC 62196/Type 2 OR SAE J1772/Type 1 Tethered Cable Length (m): 7.5
Dimensions (mm): 328 (H) x 243 (W) x 101(D)
Mounting Type: Wall/Pole mounted
Colour: Ultra White
Unit Material: PC, PA66 GF NYLON
Charging Protocol / Mode: Mode 3 (compliant with BS EN IEC 61851-1:2019)
Electrical Properties
Rated supply voltage: 230V AC - Single Phase
Rated power: 7.4 kW
Rated current of assembly: 32A (max)
Output supply: AC 230V 7.4 kW Single Phase
(Note: May vary based on vehicle make and model as well as electrical installation setup)
Mains Frequency: 50 Hz
Average standby power consumption:
Lowest LED brightness setting: 4.2W
Maximum LED brightness setting: 8.4 W
Energy efficiency (at full rated output): 99%
Rating against shock: Class I Equipment
Compatible earthing systems: TN-C-S & TN-S (PEN Fault Protection) or TT Electromagnet Compatibility (EMC): Classification Type B
Connectivity
WiFi: Wi-Fi 802.11b/g/n @2.4 GHz
Bluetooth: Bluetooth LE (Version 4.2)
Safety
RCD Protection: Internal 6mA DC RCD (External AC Protection Required, “A” Type Recommend)
PEN Fault Protection: Integrated PEN fault protection compliant with Amendment 2 of BS7671:2018.
Overcurrent protection: External protection required (MCB or RCBO). We recommend using B or C Curve, 40A
Standards and Compliance
Electric Vehicles (Smart Charge Points) Regulations 2021
EV Charging Compliance | EN 61851-1:2019, BS 7671:2018 + A1:2020
RoHS | 2011/65/EU
Safety Compliance | 2014/53/EU Radio Equipment Directive 3.1(a) - EN IEC 61851-1:2019 / EN 62196-1:2014 / IEC TS 61439-7:2014
EMC Compliance | 2014/53/EU Radio Equipment Directive 3.1(b) - EN IEC 61851-21-2:2021, EN 55032:2015 + A1:2020 (Class B)
Commission Regulation (EC) No 1275/2008
Impact Protection: IK10
Ingress Protection: IP66
Features
Status Indication/HMI: Multi-colour LED’s around the sides and the logo on the front of the enclosure.
Charging modes: Boost, Eco (Solar & Grid), Super Eco (Solar Only)
App: Full Function Control via the app.
ALM: Automatic Load Management
Other: Lock, Plug & Charge, Schedule Charging, Selectable LED Brightness & Modes
Environment
Operating Temperature: -25 to 40 °C | Operating Humidity: Up to 95% RH, non-condensing | Environmental Protection: IP66 | Pollution degree: 3 Maximum Altitude Level: 2000m
show_installation_cost | Yes |
---|---|
Manufacturer | HyperVolt |
Color | White |
Write Your Own Review